website
-46%

Caméra projecteur IE20

$109.99 USD $59.99 USD

sold in last hours

  • Résolution FHD 1080P
  • Audio bidirectionnel
  • Suivi automatique
  • Détection de mouvement intelligente
  • Vision nocturne aux couleurs cristallines
  • Panoramique 355° Inclinaison 90°Zoom numérique 4X
  • Alerte d'application instantanée
  • Stockage sur carte micro SD
  • Antennes Dua 5 dBi améliorées
  • Accès à distance smartphone/PC/tablette
  • HURRY! ONLY LEFT IN STOCK.

    Marché: UK

    • UK
    • EU

    Couleur: White

    • White
    • Black
    Ne sera pas expédié avant [19041994]
    Rupture de stock

    maestromasterpaypalvisajcbamerican expressdécouvrirdiners club

    Veuillez prévoir 2 à 5 jours ouvrables pour la préparation du produit

    Spécification

    Résolution :
    HD 2MP
    Objectif :
    4mm, 2 millions (1920*1080)
    Vision nocturne :
     8 pièces lumineuses (4 pièces blanches et 4 pièces infrarouges)
    Distance IR :
    Visibilité nocturne jusqu'à 30 m
    Pan&Tilt :
    Horizontale : 355 ° et verticale : 90 °
    Détection d'alarme :
    Assistance
    Détection de mouvement :
    Assistance
    Audio bidirectionnel :
    Assistance
    Suivi intelligent :
    Assistance
    Niveau d'étanchéité :
    IP65
    Lien d'alarme :
    Instantané, enregistrement audio/vidéo
    Notification d'alarme :
    Notifications push d'applications en temps réel
    Stockage vidéo :
    Carte Micro SD (Max 128 Go)
    Réseaux sans fil :
    WIFI 2.4G, antenne 5dBi
    Température de travail :
    -10° ~ 55°C (14°F ~ 131°F)

    Liste de colisage

    Caméra extérieure PTZ
    Chargeur d'alimentation DC 12
    Câble LAN
    Vis
    Capuchons
    Tournevis
    Manuel d'utilisation
    Boîtier étanche pour câble
    1
    1
    1
    4
    4
    1
    1
    1

    1. Comment puis-je réinitialiser ma caméra ?

  • Si votre caméra ne peut pas se connecter à l'application CamHi ou CamHipro, appuyez sur le bouton de réinitialisation (veuillez consulter la structure de la ligne de queue de l'alimentation électrique) pendant plus de 20 s sous la charge, les paramètres d'usine de la caméra seront restaurés.
  • Si votre caméra peut se connecter avec CamHi ou CamHipro, vous pouvez réinitialiser la caméra sur votre application. Veuillez suivre les instructions ci-dessous.
  • Si vous utilisez CamHipro, vous pouvez entrer le "Paramètre par défaut", puis cliquer sur "Réinitialiser".
  • Si vous utilisez CamHi, vous pouvez accéder au « Paramètre système », puis cliquer sur « Réinitialiser la caméra ».

  • 2. J'ai sélectionné le Wi-Fi 2,4 GHz et saisi le mot de passe Wi-Fi correctement, pourquoi la caméra n'est-elle toujours pas connectée au Wi-Fi ?

  • Veuillez vous assurer que le réseau que vous avez utilisé dans votre caméra IP et le téléphone sont les mêmes.
  • Veuillez vous assurer que le réseau que vous avez utilisé est de 2,4 G et non de 5,0 G.
  • SSID Wi-Fi et mot de passe Wi-Fi sans caractères spéciaux, tels que : !@#$%^&*()_+
  • Veuillez vous assurer que votre routeur ouvre DHCP ; vous pouvez vous connecter au paramètre du routeur et trouver le DHCP pour le vérifier fermé ou ouvert. S'il se ferme, il ne distribuera pas d'adresse IP à cette caméra IP et il échouera.
  • Veuillez vous assurer que l'antenne de la caméra est bien serrée si vous choisissez une connexion Wi-Fi.
  • Veuillez vous assurer qu'il n'y a pas de limite au nombre d'appareils pour connecter le routeur.
  • Veuillez vous assurer que le signal Wi-Fi est supérieur à 80 %. Vous pouvez le tester dans "Paramètres Wi-Fi" sur l'application lorsque vous connectez l'appareil photo avec un câble Internet.
  • Veuillez appuyer sur le "bouton de réinitialisation" pendant plus de 20 secondes pendant la charge pour réinitialiser l'appareil photo si vous souhaitez modifier la connexion.

  • Avis :

  • Si vous choisissez la connexion Wi-Fi, assurez-vous que le signal Wi-Fi connecté à la caméra est jusqu'à 80 %.
  • Si votre caméra ne parvient pas à se connecter correctement mais que votre réseau est bon, veuillez retirer votre carte SD et réessayer, peut-être que la carte SD est incompatible. Si le nombre d'appareils connectés au Wi-Fi est excessif, cela entraînera un conflit d'adresse IP et l'échec de la connexion au Wi-Fi.
  • Si vous saisissez le mauvais mot de passe Wi-Fi, cela vous empêchera d'accéder aux fonctions. Ainsi, vous pouvez "Modifier" la caméra et la supprimer, puis la réinitialiser.

  • 3. La caméra est hors ligne après quelques mois ? Il ne peut pas être connecté automatiquement après avoir été hors ligne ?

    Veuillez vérifier :

  • Si la caméra est alimentée normalement ou non.
  • Si l'antenne est serrée.
  • Si les appareils connectés sont excessifs ou non.
  • Si l'intensité du signal change ou non.
  • S'il y a conflit d'adresse IP ou non.
  • Veuillez redémarrer votre caméra et le routeur pour le vérifier à nouveau. Débranchez simplement l'alimentation et rebranchez-la.

    S'il ne peut pas se connecter, veuillez retirer la carte micro SD et réinitialiser la caméra, puis reconnectez-la.


    4. Comment reconnecter une caméra déconnectée qui est installée au mur ?

    Une fois la caméra installée sur le mur, il n'est pas nécessaire de retirer la caméra. Vous pouvez utiliser le mode AP pour connecter votre caméra.

    Voici les étapes :

  • Supprimez d'abord la caméra de votre application, puis redémarrez votre routeur.
  • Appuyez sur le bouton de réinitialisation pendant 20 secondes, vous pouvez voir trois câbles sur votre caméra, le premier est pour le port RJ45, le second est pour l'alimentation, le troisième est le bouton de réinitialisation.
  • Attendez 1 à 2 minutes, la caméra doit redémarrer à ce moment, vous n'avez rien à faire, attendez juste.
  • Accédez au paramètre WLAN de votre téléphone et recherchez le Wi-Fi nommé IPCAM-XXXXX (tel que celui-ci).
  • Saisissez le mot de passe pour connecter ce Wi-Fi (IPCAM-XXXXX), le mot de passe initial est 01234567.
  • De retour à l'application CamHi ou CamHipro, cliquez sur "Ajouter une caméra" - "Rechercher une caméra à partir du réseau local".
  • Après avoir connecté votre caméra, veuillez cliquer sur "Paramètres Wi-Fi" "Gestionnaire Wi-Fi" pour choisir le Wi-Fi auquel vous souhaitez vous connecter.

  • 5. Pourquoi n'y a-t-il toujours qu'une vidéo de 14 secondes après avoir défini une vidéo de 900 secondes ?

    L'enregistrement d'alarme ne dure que 10 à 14 secondes.Il est difficile pour certains clients qui utilisent le stockage FTP d'enregistrer une longue vidéo, mais l'enregistrement planifié peut être réglé sur 15 à 900 secondes.


    6. Pourquoi le FTP ne télécharge-t-il que les photos mais pas les vidéos ?

    Si vous souhaitez enregistrer des vidéos sur FTP, vous devez insérer une carte micro SD dans votre caméra. Ensuite, la caméra enregistrera les enregistrements d'alarme sur votre FTP.


    7. Pourquoi l'heure d'enregistrement ne se synchronise-t-elle pas avec l'heure réelle ?

    Veuillez accéder à "Réglage de l'heure" pour sélectionner le bon fuseau horaire où la caméra est installée et notez si l'heure locale est l'heure d'été. Si l'heure est mal réglée, vous ne pouvez pas rechercher les enregistrements de la caméra.


    8. Pourquoi je ne trouve pas mes enregistrements ?

    Veuillez essayer de cliquer sur l'icône de recherche pour rechercher vos enregistrements.


    9. Comment connecter ma caméra à mon nouveau fournisseur Wi-Fi ?

    Veuillez saisir les « paramètres Wi-Fi » de votre application pour connecter d'abord la caméra à votre nouveau point d'accès Wi-Fi ou téléphonique. Sinon, vous devez réinitialiser la caméra, puis suivre A4 pour reconnecter la caméra.


    10. La carte micro SD ne peut pas être reconnue.

    Il y a peut-être un problème avec la carte micro SD ou le logement de carte. Veuillez vérifier si la carte SD est compatible ou non et si la carte SD est endommagée ou non.

    Veuillez essayer de formater votre carte micro SD, puis reconnectez-vous. La carte Micro SD dans l'appareil photo est plus facilement endommagée que dans l'autre appareil car la carte SD lit et écrit les vidéos tout le temps dans l'appareil photo.

    Si cela ne fonctionne toujours pas après avoir formaté la carte micro SD, veuillez changer une autre carte micro SD. Il est suggéré d'utiliser une carte micro SD de sécurité blanche spéciale SanDisk, classe 10 (légale), ne dépassant pas 128 Go. 64 Go suggérés.


    11. Après avoir téléchargé des vidéos via l'application pour téléphone, pourquoi ne les trouve-t-on pas dans la galerie de mon téléphone ?

    Veuillez rechercher vos vidéos téléchargées dans l'application, puis cliquez sur l'icône de sauvegarde pour enregistrer les vidéos dans la galerie de votre téléphone. La durée des enregistrements d'alarme est fixée à 14 secondes. La durée des enregistrements du plan peut être comprise entre 15 et 900 secondes.


    12. La carte micro SD écrasera-t-elle automatiquement les enregistrements ?

    Toutes nos caméras ont une fonction d'enregistrement en boucle. Il couvrira les enregistrements précédents lorsque la carte micro SD sera pleine. Vous pouvez télécharger les enregistrements importants avant qu'ils ne les écrasent. La carte Micro SD de 128 Go peut enregistrer jusqu'à 2 semaines. 64 Go peuvent enregistrer jusqu'à 1 semaine. 32 Go peuvent enregistrer 3-4 jours. 16 Go peuvent enregistrer 2 à 3 jours.


    13. La caméra fonctionne-t-elle sans réseau ?

    Notre caméra peut bien fonctionner sans réseau. Et vous pouvez connecter votre appareil photo au point d'accès de votre téléphone, au Wi-Fi mobile ou au Wi-Fi domestique, etc. Ou retirez la carte micro SD pour afficher tous les enregistrements sur votre ordinateur.


    14. Il fait noir la nuit et je ne vois rien.

    Veuillez mettre votre doigt sur le capteur infrarouge lorsque la caméra est connectée à l'alimentation. Si les LED rouges sont allumées, veuillez ajuster l'angle de votre caméra pour le vérifier à nouveau. Cela peut être dû à la réfraction de la lumière. Assurez-vous que le paramètre IR CUT est réglé sur "auto" sur HiP2P (le paramètre initial est automatique). Si cela ne fonctionne pas, veuillez nous contacter.


    15. Je veux mettre à jour le firmware mais j'échoue à chaque fois.

    Les préfixes doivent être constants pendant le processus de mise à niveau du micrologiciel, vous pouvez voir les préfixes à partir du paramètre "Informations sur le périphérique" de la caméra. De plus, assurez-vous que la caméra et votre ordinateur sont sous le même réseau. Si vous n'êtes pas sûr du firmware dont vous avez besoin, veuillez envoyer la version actuelle du firmware pour nous demander. Nous vous aiderons.


    16. Quelle est l'URL (Uniform Resource Locator) de ONVIF et RTSP ?

    L'URL de la caméra est 8080 et 554. Par exemple, l'adresse IP de votre caméra est 192.168.1.38, votre port ONVIF de flux principal est onvif://192.168.1.38:8080/11 et le port ONVIF de flux secondaire est onvif://192.168.1.38:8080/12. Votre port RTSP du flux principal est rtsp://192.168.1.38:554/11 et port RTSP du flux secondaire rtsp://192168.1.38:554/12.


    .

    Customer Reviews

    Based on 32 reviews
    94%
    (30)
    6%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    C
    Chainmail
    Decent camera and good instructions

    This latest model replaces a fixed camera. I was looking for something that could move to check for parcels delivered to the back door and could also swivel to take in the rest of the garden. We get foxes, hedgehogs and cats visiting at night , and it drives our dogs crazy. Im looking forward to seeing how youd the night vision is but so far the daytime view is very clear and the camera movement is very smooth and responsive. Installation was so straightforward and the app is good too. Great value, and I am thinking of getting another one for the front of the house.

    T
    The PM
    A tip re installing...

    I have a lot of these, albeit white ones and other ieGeek models but they all have the same problem - installation especially out of easy reach. I have reviewed already but here is my hot tip based on experience!

    They can be a nightmare and even dangerous to install - wobbling at the top of a ladder, trying to drill tiny holes in just the right place then trying with one hand to tighten the tiny screws into the impossible to reach holes behind the cowling whilst trying not to drop the camera with they other hand. As for steadying yourself up that ladder.... forget it! The tiny screws often end up having stripped heads because of having to screw them in from an angle into wood that's hardened with age or worse still plugs in stone walls.

    So, I don't even try any more! I make up mounts to which I firmly attach the cameras in comfort before screwing the mount in place, using only two human sized screws that can easily be turned with a human sized screwdriver without damage or being a contortionist.

    Pics are self explanatory, of course the actual mount will depend on the installation. This one if for under the eaves.

    l
    lee weller
    Sensitive in motion detection mode

    Good quality images,but at night find the sensor sets it off way to much. If in colour mode the light seems to be on more than off.we use infa red mode still good picture.
    Set it up to Ethernet cable now but did use wifi at first seemed fine on that just wanted wired to stop drop out. Only had it up for a week and caught some scumbag trying car door handles at four in morning. well worth the money but will need mini SD card, I use 256gig one lasts over a week before re writing over .
    Had to buy Ethernet cable and run through wall
    Power cable is thin and three meter long, you can buy power transformer extensions if needed. I rean mine in to garage power socket and hid wire.

    k
    kbo
    Excellent security camera

    This is a great camera. It arrived well packaged with everything you need to install it, including a clear and comprehensive instruction manual in well written English. This takes you through the setup process step by step and when combined with the CamHipro app it makes the setup process very quick and easy. I carried out the initial setup using the supplied ethernet cable and then added the wifi connection. Using this method it shouldnt take longer than 5 - 10 mins to setup.

    The camera itself looks very well built and is IP66 rated, which I need as the camera is positioned outside. The picture quality is excellent both at night and during the day with good range and clarity, whether in SD or HD, and recordings can be saved to an SD card inside the camera.

    I have another security camera which is static and this camera is larger but has the significant benefit of being able to rotate and control the pitch through the app by swiping your finger across the image. It's very responsive and a great feature. As I use the camera outside, the motion detection and auto tracking function are a clever and really useful feature, and you can set the app up to receive a push notification when movement is detected. Apparently, it includes a siren to scare away intruders and two way audio, but I've not tried this yet and the two way audio is not a feature I need, but others might.

    Overall, Im very pleased with the camera quality and the functions it includes. The integration with the app works really well and incorporates many features that are useful for my use, so I would definitely recommend it to anyone interested in a controllable security camera.

    V
    V J Chittenden
    This camera does it all!

    This is the second iGeek camera I have purchased. I have found with iGeek cameras I get reliable connection between the app and the camera compared with other makes of cameras I have owned. Also their customer service is friendly and efficient.

    This new IE20 360 security camera is bigger than my previous one but that's because it has the ability to rotate in two planes. When I read that it can rotate 360 I didn't fully believe it, but it can literally see all around itself.

    Setting up this camera was a breeze. There is no need to connect the supplied ethernet cable. You simply switch the camera on and then find its wi-fi signal on your phone - then you enter the supplied password and once connected you can supply your home wi-fi network settings (password, etc) to the camera and it's all done! Once you have installed the CamHiPro app on your phone you can see the camera feed and adjust various settings such as quality (HD or SD) and colour or B/W night vision. You can move the camera up and down or left and right by swiping on your phone screen. You can also zoom in.

    The image quality in all modes is excellent. I was particularly impressed with the colour night vision. Colours are rendered accurately even when there is hardly any light (see photo).

    From the app, you can also enable, individually, the microphone (to hear what the camera hears) and the speaker (to be able to speak to callers, intruders etc)

    To use the CamHiPro app on my PC I use BlueStacks 5 Android emulator. This allows me to monitor my cameras on my PC monitor, to save my phone battery.

    Really I am completely happy with these iGeek cameras. They work exactly as I expect, without any hassle.

    Customer Reviews

    Based on 32 reviews
    94%
    (30)
    6%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    C
    Chainmail
    Decent camera and good instructions

    This latest model replaces a fixed camera. I was looking for something that could move to check for parcels delivered to the back door and could also swivel to take in the rest of the garden. We get foxes, hedgehogs and cats visiting at night , and it drives our dogs crazy. Im looking forward to seeing how youd the night vision is but so far the daytime view is very clear and the camera movement is very smooth and responsive. Installation was so straightforward and the app is good too. Great value, and I am thinking of getting another one for the front of the house.

    T
    The PM
    A tip re installing...

    I have a lot of these, albeit white ones and other ieGeek models but they all have the same problem - installation especially out of easy reach. I have reviewed already but here is my hot tip based on experience!

    They can be a nightmare and even dangerous to install - wobbling at the top of a ladder, trying to drill tiny holes in just the right place then trying with one hand to tighten the tiny screws into the impossible to reach holes behind the cowling whilst trying not to drop the camera with they other hand. As for steadying yourself up that ladder.... forget it! The tiny screws often end up having stripped heads because of having to screw them in from an angle into wood that's hardened with age or worse still plugs in stone walls.

    So, I don't even try any more! I make up mounts to which I firmly attach the cameras in comfort before screwing the mount in place, using only two human sized screws that can easily be turned with a human sized screwdriver without damage or being a contortionist.

    Pics are self explanatory, of course the actual mount will depend on the installation. This one if for under the eaves.

    l
    lee weller
    Sensitive in motion detection mode

    Good quality images,but at night find the sensor sets it off way to much. If in colour mode the light seems to be on more than off.we use infa red mode still good picture.
    Set it up to Ethernet cable now but did use wifi at first seemed fine on that just wanted wired to stop drop out. Only had it up for a week and caught some scumbag trying car door handles at four in morning. well worth the money but will need mini SD card, I use 256gig one lasts over a week before re writing over .
    Had to buy Ethernet cable and run through wall
    Power cable is thin and three meter long, you can buy power transformer extensions if needed. I rean mine in to garage power socket and hid wire.

    k
    kbo
    Excellent security camera

    This is a great camera. It arrived well packaged with everything you need to install it, including a clear and comprehensive instruction manual in well written English. This takes you through the setup process step by step and when combined with the CamHipro app it makes the setup process very quick and easy. I carried out the initial setup using the supplied ethernet cable and then added the wifi connection. Using this method it shouldnt take longer than 5 - 10 mins to setup.

    The camera itself looks very well built and is IP66 rated, which I need as the camera is positioned outside. The picture quality is excellent both at night and during the day with good range and clarity, whether in SD or HD, and recordings can be saved to an SD card inside the camera.

    I have another security camera which is static and this camera is larger but has the significant benefit of being able to rotate and control the pitch through the app by swiping your finger across the image. It's very responsive and a great feature. As I use the camera outside, the motion detection and auto tracking function are a clever and really useful feature, and you can set the app up to receive a push notification when movement is detected. Apparently, it includes a siren to scare away intruders and two way audio, but I've not tried this yet and the two way audio is not a feature I need, but others might.

    Overall, Im very pleased with the camera quality and the functions it includes. The integration with the app works really well and incorporates many features that are useful for my use, so I would definitely recommend it to anyone interested in a controllable security camera.

    V
    V J Chittenden
    This camera does it all!

    This is the second iGeek camera I have purchased. I have found with iGeek cameras I get reliable connection between the app and the camera compared with other makes of cameras I have owned. Also their customer service is friendly and efficient.

    This new IE20 360 security camera is bigger than my previous one but that's because it has the ability to rotate in two planes. When I read that it can rotate 360 I didn't fully believe it, but it can literally see all around itself.

    Setting up this camera was a breeze. There is no need to connect the supplied ethernet cable. You simply switch the camera on and then find its wi-fi signal on your phone - then you enter the supplied password and once connected you can supply your home wi-fi network settings (password, etc) to the camera and it's all done! Once you have installed the CamHiPro app on your phone you can see the camera feed and adjust various settings such as quality (HD or SD) and colour or B/W night vision. You can move the camera up and down or left and right by swiping on your phone screen. You can also zoom in.

    The image quality in all modes is excellent. I was particularly impressed with the colour night vision. Colours are rendered accurately even when there is hardly any light (see photo).

    From the app, you can also enable, individually, the microphone (to hear what the camera hears) and the speaker (to be able to speak to callers, intruders etc)

    To use the CamHiPro app on my PC I use BlueStacks 5 Android emulator. This allows me to monitor my cameras on my PC monitor, to save my phone battery.

    Really I am completely happy with these iGeek cameras. They work exactly as I expect, without any hassle.

    Dimanche Lundi Mardi Mercredi Jeudi Vendredi Samedi
    janvier, février, mars, avril, mai, juin, juillet, août, septembre, octobre, novembre, décembre
    Pas assez d'articles disponibles. Il ne reste que [max].
    Parcourir la liste de souhaitsSupprimer la liste de souhaits
    Panier d'achat

    Votre panier est vide.

    Retour à la boutique

    Ajouter un message à votre commande Editer la note de votre commande
    Calculer les frais de port
    Ajouter un coupon

    Calculer les frais de port

    Ajouter un coupon

    Le code de coupon fonctionnera sur la page de paiement

    Caméra projecteur IE20

    UK / White
    UK / White
    $109.99 USD $59.99 USD