website
ieGeekieGeekieGeek
0

Baby Monitor Baby 1T

Baby 1T

Battery Camera ZS-GX1S

Baby 1T.jpg__PID:c8478bdc-243e-4e5d-8463-2165082d5241

Baby Monitor Baby 1T

Download

PRODUCT VIDEOS

Set up

Unboxing

FAQ

1. The monitor cannot be previewed properly?

Check whether the monitor has connected to the camera. If not, pair the camera and the monitor firstly.


2. Cannot find the pairing button?

The pairing button is the call button of the camera. Long press the button for 3 seconds, and follow the step instructions of the display. (To enter the pairing interface of the display, press the Menu button on the display screen, and select > Camera Management.)


3. What if the monitor screen is stuck and it doesn' t work while pressing any buttons?

Reset your monitor with the needle, and then long press the power button of your monitor to restart it.


4. Why I can' t get the notifications with my cell phone App when I connect the camera to the monitor?

Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system has been opened.


5. How can I add devices or configure my network?

The camera can be connected to both the monitor and the application. Generally, it connects to the monitor by default.


6. The sound and cry detection function does not work.

The sound detection interval is 1 minute, after the sound triggers the alarm, the interval is 1 minute again to avoid frequent alarms. The cry detection function can detect most babies crying. This function uses a sound filtering algorithm, so some crying may not trigger the 'cry detection' function.

Please follow the steps below to connect the camera to the application.

  • Make sure the Wi-Fi network is a 2.4GHz network, as the camera does not support 5GHz Wi-Fi.
  • Download the appropriate application on your phone. Register a new account to sign in or sign in indirectly.
  • Use the needle to reset the camera until the red status light flashes slowly (you must connect the camera to the app within 2 minutes or you must reboot the camera again).
  • Follow the step-by-step instructions on your smartphone to add the screen and scan the QR code with the camera.

  • 6. Can I set up motion tracking and alarm zones on the monitor?

    No, you need to set the motion tracking and alarm area through the ieGeek Cam APP.


    7. Why does the display make a bee sound?

    Because the monitor is too close to the camera, take it away from the camera more than 1 meter.


    If you encounter any other problems, please send your order number and problem to service@iegeek.com, we will deal with your issue within 24 hours.

    Dimanche Lundi Mardi Mercredi Jeudi Vendredi Samedi
    janvier, février, mars, avril, mai, juin, juillet, août, septembre, octobre, novembre, décembre
    Pas assez d'articles disponibles. Il ne reste que [max].
    Parcourir la liste de souhaitsSupprimer la liste de souhaits
    Panier d'achat

    Votre panier est vide.

    Retour à la boutique

    Ajouter un message à votre commande Editer la note de votre commande
    Calculer les frais de port
    Ajouter un coupon

    Calculer les frais de port

    Ajouter un coupon

    Le code de coupon fonctionnera sur la page de paiement